Oscilloscope electronic teaching and training DIY kit

Product details

Shell oscilloscope uses 9V DC power supply (the power supply voltage should not exceed 10V! Otherwise it may burn the machine). The kit itself does not include a power supply. Users need to prepare the power supply by themselves, and the power supply current should be able to provide more than 200mA. Characteristic index. Adjustable vertical displacement, with instructions. Coupling methods include. DC/AC/GND With automatic, conventional and single trigger modes, it is convenient to capture instant waveforms. Can be triggered by rising or falling edge. Trigger level position is adjustable, with indication. Observe the waveform before the trigger (negative delay) The waveform display can be frozen at any time (HOLD function) Comes with 1KHz /3.3V square wave test signal source. With digital display of waveform parameters, the parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, effective value. Save/recall the waveform, the waveform does not disappear when turned off

Material

plastic

The highest real-time sampling rate

1Msps

Precision

12Bit

Sampling buffer depth

1024 bytes

Analog bandwidth

0-200KHz

Vertical sensitivity

5mV/Div – 20V/Div (in 1-2-5 way)

Input impedance

1MΩ

Maximum input voltage

50Vpp (1:1 probe), 400Vpp (10:1 probe)

Horizontal time base range

10μs/Div – 50s/Div (increase by 1-2-5)

Weight

120 g